|
574-256-5001 or 1-800-832-5653
Control Products for Shot Peening and Blast Cleaning Processes |
||||
| Home | | About Us | | Contact Us | | Distributors | |
Sensors Air Type
| Media flow sensors for air type applications are available for ferrous and non-ferrous media in various mounting configurations and they may be used to satisfy the requirements of AMS 2430 and Nadcap manual or automatic peening applications. (They are not appropriate for AMS 2432 or Nadcap Computer Controlled applications). | ||
| Location 1 | Location 2 | Location 3 |
| Sensor is mounted below regulator (orfice plate or grit valve) and above the mixing chamber. | Sensor is mounted in line with the blast hose. | Sensor is mounted in front of the nozzle |
| Location 1 Ferrous media flow rate sensors | ||||||
| CPN | Model | Flow lbs/min | Display | |||
 999245 | Frequency output | 20 |
| |||
999277 | Frequency output | 100 | ||||
999278 | Frequency output | 200 | ||||
 999 | 0-5 Vdc output | 20 |
 MSD Display  Data SheetBar-graph style display, provides ±12 Vdc power | |||
999281 | 0-5 Vdc output | 100 | ||||
 999344 (24 Vdc power) | 0-5 Vdc output | 20 | Provides 0-5 Vdc output signal Requires 24 Vdc Power | |||
| Location 1 Non-Ferrous media flow rate sensors | ||||||
| CPN | Model | Flow lbs/min | Notes | |||
 999357 24 Vdc power |
|
30 | Linear signal conditioner with 10-element bar graph display is included with package. Designed for glass bead, ceramic bead, AlOx, plastic media. Factory calibration available. Data sheet Installation manual | |||
| Location 2 Non-Ferrous media flow detectors (relay ouptput) | |||
 999379 | MFD-4 | Placed over the plastic suction hose with pin protruding into the flow path. Pin is easily replaced on-site. Relay output for flow or no-flow. Requires 24 Vdc power. Data sheet | |
 999375 | MFD-250 | 1/4" NPT pipe body. Suitable for direct pressure or suction blast applications. Pin is easily replaced on-site. Relay output for flow or no-flow. Requires 24 Vdc power. Data sheet | |
 999378 | MFD-P1 | 1.25" NPT pipe body. Pin is easily replaced on-site. Internal bore of 0.75". Suitable for direct pressure applications. Relay output for flow or no-flow. Requires 24 Vdc power. Data sheet | |
| Location 2 Non-Ferrous media flow sensors (0-5 Vdc output) | ||
.gif) 999369 | T200 | Capacitive sensor with flange type mounting. Requires ±12 Vdc power and provides 0-5 Vdc output (limited linear range) Data Sheet |
 999366 | E200 | Capacitive sensor with pipe type mounting. Requires ±12 Vdc power and provides 0-5 Vdc output (limited linear range) Data Sheet |
| Location 3 Media flow sensors (any media 0-5 Vdc output) | ||
 999___ | MS-1 (0.850) Data sheet | Capacitive sensor for any media fits over end of blast nozzle. Requires 12 Vdc power (available from MSD display unit shown below). Data Sheet |
999___ | MS-1 (1.62) Data Sheet | |
©2012 Electronics Incorporated - 56790 Magnetic Drive - Mishawaka, Indiana 46545
Phone: 574-256-5001 / 800-832-5653 - Fax: 574-256-5222
Phone: 574-256-5001 / 800-832-5653 - Fax: 574-256-5222