MagnaValve Selector Guide for Wheel Blast Machines
24 Vdc Models
120 Vac Models
Hopper Refill MagnaValves
24 Vdc MagnaValves for Wheel Blast Machines
* Flow rates shown are approximations and are listed for guidance only
120 Vac MagnaValves for Wheel Blast Machines
| Amperage Control |
| | Model Number | lb/min capacity* | kg/min capacity* | Max HP | Controls |
 | VLP-1000 | 1000 | 500 | 25 | | Automatic amperage closed loop control |  | AC | | Manual operator control | | MC | |
| | | | | |
 | LP-2000 | 2000 | 1000 | 50 |
| | | | | |
 | 100 | 2400 | 1200 | |
| Flow Rate Control |
 | 250-P | 700 | 350 | 25 | | Automatic flow rate closed loop control | | FC | |
| | | | | |
 | 500-P | 1200 | 600 | 50 |
| Manual Control |
 | VLP-1000VAR | 1000 | 500 | 25 | |
| | | | | |
 | LP-2000VAR | 2000 | 1000 | 50 |
| Contact us for pricing |
* Flow rates shown are approximations and are listed for guidance only
Hopper Refill MagnaValve for Wheel Blast Machines
| The Hopper Refill MagnaValve eliminates the need for an air cylinder and lowers maintenance costs.  The Hopper Refill MagnaValves are normally-closed magnetic valves typically used to replenish shot hoppers with cast steel shot or cut wire shot. The valve construction includes a permanent magnet for normally-closed operation and an electromagnet to activate shot flow. By applying power to the electromagnet, a full-flow condition may be achieved. When power is off, the valve will hold shot due to the permanent magnet.
| 
The Hopper Refill MagnaValve eliminates the need for a high maintenance air cylinder and dipper valve. |
* Flow rates shown are approximations and are listed for guidance only
